Table of Contents
How do I do a hard reset on my GE microwave?
Perform a hard reset. Pull the plug out of the wall power supply, and wait a moment. Plug the GE microwave back into the wall power supply to reset any anomalies with the microwave's memory. You will need to reset the time of day if you perform a hard reset. via
Where is the reset button on a GE microwave?
Locate the "Clear/Off" button on the front of the microwave. Hold it down for 3 to 5 seconds until the "LOC" error on the display disappears, or the timer or cooking time on the display resets. via
Is there a reset button on a microwave?
A soft reset is simply turning off the microwave oven to cancel or erase the program you've input in the microwave. To do this, you will just simply press on the Off/Clear button. Pressing Off/Clear button and holding it for about 3 seconds will also resolve the Control Locked feature of the microwave. via
What is a hard reset on a microwave?
A hard reset is necessary. Take the plug out of the wall power supply. The microwave's memory can be reset by plugging the microwave back into the wall power supply. If you perform a hard reset, you'll need to change the time of day. via
What causes a microwave to suddenly stop working?
The most common cause for a microwave oven not working at all is a blown main fuse. The microwave main fuse will cut the flow of electricity if too much current passes through it. There can also be thermal fuses, cavity fuses, and thermoprotectors which will interrupt the electrical flow if the microwave overheats. via
Why is my microwave keypad not working?
If the microwave key panel is not responding or working properly, check the following: Unplug microwave or turn off house circuit breaker for 30 seconds. Plug back in, or reset circuit breaker, and try reprogramming unit. via
Where is the fuse on a GE Profile microwave?
The fuse is located under the plastic grill at the top of the microwave. It's held on by two screws. Once you've removed the screws and taken off the plastic grill, you go to the right side of the microwave and remove another screw that holds a small metal grill in place. via
How do you know if a fuse is blown in your microwave?
It's easy to tell if a glass fuse is blown; it will show scorch marks, and the filament will be melted. To check a ceramic fuse, use an ohmmeter or continuity tester. With an ohmmeter or multimeter, you should see a reading close to zero ohms if the fuse is intact, or infinite if it's blown. via
How do I fix my GE microwave control panel? (video)
Is there a fuse in a microwave?
Fuses are located in many places inside the microwave, including the top, side, and behind the vent grille. Using the wiring diagram can help you locate the appropriate fuse. Once you have located the fuse, remove any necessary wires and fasteners to free it from the microwave. via