What Is The Difference Between 325 And 38 Chain

via

What does 325 mean on a chainsaw chain?

The pitch . 325 is a smaller top cutter and tie strap it is easier to turn for a saw . The 3/8 is a bigger top cutter and tie strap . Mainly in a 20 " chain has more cutters in . via

Will a 3/8 chain fit a .325 bar?

No you can't use a 3/8 chain on a . 325 bar unless the sprocket is . via

What do the numbers on a chainsaw chain mean?

The numbers stamped on a chainsaw chain are an ID code used by the manufacturer to indicate the pitch and gauge measurements of the chain. Pitch and gauge are important dimensions which influence whether or not a chain is compatible with a chainsaw. via

What does MS mean on Stihl chainsaws?

What does MS mean? We'll start with an easy one. Every STIHL chainsaw model name starts with MS, MSA, or MSE. The common part, MS, stands for Motorsäge which is German for chainsaw. MSA indicates that it's a battery chainsaw and MSE tells us that it's an electric model. via

How can I tell what size chain is on my chainsaw?

To get the correct size, simply count 3 rivets on the chain and measure the distance between them from the centre points. Now divide this by half to get your size. As an example, three rivets that measure ½ an inch across divided by two gives you a pitch of a ¼ inch. via

What is chain saw pitch?

Chain pitch is the size of the chain and is defined as the distance between any three consecutive rivets divided by two. Oregon chain is made in several pitches - 1/4" is the smallest, 3/8" is the most popular, and 3/4” is the largest. via

What angle do you file a chainsaw chain?

Most standard chain is sharpened at 25-35 degrees for crosscutting wood and for ripping with the grain it's best to use 10 degrees. So if you are cutting with the grain, you should be using 10 degree sharpened chain. They do make ripping chain that comes sharpened at 10 degrees for cutting with the grain of a log. via

Does the number of drive links matter?

Number of individual drive links must be counted. No exceptions. Simple length measurements (like "a 2 foot chain) are not helpful for correctly matching chains. Chain length is determined by a combination of distance between links (pitch) and the number of links. via

What does 16 mean on a chainsaw chain?

16 = .404 pitch .063 gauge. 18 = .404 pitch .080 gauge. 19 = .325 pitch .063 gauge. via

How many drive links in a 16 inch chain?

A 16" bar normally requires 66 drive links with . 325 chain, Stihl is 67 but they gotta be different. 72 indicates an 18" bar. via

How much does a Stihl MS 461 cost?

$1,029.95. The STIHL MS 461 chainsaw was made for tough cutting jobs and long workdays. This professional-grade saw is up to 20% more fuel-efficient than the MS 460 STIHL MAGNUM®, but delivers every ounce of the power. via

What chainsaw do professional loggers use?

Stihl 500i Chainsaw

The Stihl 500i is generally seen as the ultimate logging chainsaw. It is Stihl's top-of-the-line professional chainsaw and has been designed and built especially for the logging industry and professional arborists. via

How much does a Stihl MS 362 cost?

Starting a $809.99 with a 18" bar and chain. Brains and brawn come together in this well-rounded professional chainsaw. The MS 362 C-M features the same great power, weight and fuel efficiency as the MS 362, but also features our exclusive STIHL M-Tronic™ engine management technology. via

How is chain size measured?

To measure the chain size, if you have just the sprocket, use calipers to measure between the teeth. Measure from center to center of where the chain roller would set between the teeth that will give you the pitch. Once you know the pitch you can determine what chain size you would need. via

What size is 3/8 Picco chain?

'Picco' is just STIHL's name for 3/8" low profile chain. The pitch (average length between rivets) is still approximately 3/8 inches, but the the height of the tooth is reduced to take a smaller bite, for smaller, lower powered saws. via

What's the best chainsaw sharpener?

Top 10 Chainsaw Sharpeners – Reviews

  • Katzco Chainsaw Sharpener File Kit.
  • Timber Tuff CS – BWM Electric Sharpener.
  • Husqvarna 653000035 SharpForce Chain Sharpener 3/16″
  • Oregon 620-120 Professional 120V Bench Grinder.
  • Granberg G-106B Bar-Mount Sharpener.
  • Oregon 520-120 120V Bench Mounted Grinder.
  • Tecomec Jolly EVO Chain Grinder.
  • via

    How often should you sharpen chainsaw blade?

    Cutters can be sharpened up to 10 times or more before the chain needs replacing. If your cutters are worn unevenly after a few sharpenings, a professional can regrind them to uniform shape. If you use the same chain for a few years, then buy a new one, the new one won't mesh smoothly with the sprocket and bar. via

    What chain is on a Husqvarna 455 Rancher?

    Husqvarna H80-72 20 in. Chainsaw Chain, 0.375 in. Pitch, . 050 in. via

    What's the difference between chainsaw chains?

    Both styles of chain have fewer cutters than standard chain; semi skip chain has more cutters than full skip chain. With fewer cutters tearing through the wood, full-skip and semi-skip chain experience less drag and can cut quickly. They work well with low-power saws or saws with extremely long bars. via

    What is the most aggressive chainsaw chain?

    A . 404″ chainsaw pitch is the most aggressive chainsaw chain pitch for professional arborists. via

    Is it worth sharpening a chainsaw chain?

    As dozens of cutter teeth chew through dense wood, they're bound to become dull, reducing the tool's effectiveness and making it more physically demanding for you to control. Regular sharpening, accomplished by filing, will keep your chainsaw purring like a very rugged kitten. via

    Does skip tooth chain cut faster?

    A skip chain has fewer cutting teeth than a conventional chain which means it won't be dragging as many teeth through the wood you're cutting. Less drag on the chain means less power is needed to cut through the log. That means the motor on your saw runs faster which keeps it in a more efficient power curve. via

    Why was Stihl ms290 discontinued?

    Stihl's #1 selling chainsaw for years running, the MS 290 Farm Boss, is being discontinued. They stopped production on the Farm Boss nearly a year ago and supply is becoming scarce. via

    Is Stihl made in China?

    "Our factory here in China is an important member of STIHL's international manufacturing network. STIHL produces chainsaws, brushcutters and hedge trimmers in China for the Asian and international markets. via

    Do Oregon chains fit Stihl?

    Low Profile Pitch Chainsaw Chain, 55 Drive Links. The Oregon R55 AdvanceCut Saw Chain is an ideal choice for landscapers and homeowners who use small, low powered saws to cut trees and limbs to maintain their properties. This 14", 3/8" pitch chain fits several Stihl saws including 017, 019, MS 170, 018 and MS 191T. via

    Leave a Comment

    Your email address will not be published. Required fields are marked *